Manufacturing Careers Archives

FlexTrades is hiring experienced Manual Lathe Machinists for nationwide project-based manufacturing assignments supporting precision aerospace machining, repair and overhaul operations.

This role is designed for machinists who can independently set up and operate manual engine lathes, perform ID and OD turning, solve fixturing challenges and hold tight tolerances on complex components.

Position Overview

The Manual Lathe Machinist is responsible for setting up and operating 2-axis manual engine lathes to repair and overhaul aerospace engine components.

This position requires strong blueprint reading skills, working knowledge of GD&T and the ability to inspect machined parts using precision measuring tools while maintaining tolerances up to .001 inch.

Responsibilities

Set up and operate 2-axis manual engine lathes
Perform ID and OD turning operations on aerospace engine components
Repair and overhaul components to required dimensions and tolerances
Read and follow routers, data cards, drawings and work instructions
Independently determine part setup, fixturing and machine alignment
Inspect parts using micrometers, calipers, vernier calipers and other measuring tools
Verify dimensions and tolerances according to prints and specifications
Deburr components using air-driven disc grinders
Perform basic operator-level machine maintenance
Safely use overhead cranes and carts to move fixtures and parts

Qualifications

Experience setting up and operating manual engine lathes
Experience performing ID and OD turning operations
Ability to read and interpret blueprints and technical drawings
Working knowledge of GD&T
Understanding of true position, runout and flatness
Experience inspecting machined parts to print requirements
Ability to use micrometers, calipers and other precision measuring tools
Experience holding tolerances up to .001 inch
Ability to work independently
Ability to solve setup and fixturing challenges
Experience machining stainless steel, super alloys or similar materials preferred
CMM operation experience or ability to read CMM reports preferred

About FlexTrades

FlexTrades is a manufacturing workforce solutions company that deploys skilled tradespeople and technical specialists to worksites across the United States. We help manufacturers maintain production, improve quality and complete critical projects by providing experienced professionals who are ready to contribute on day one.

Our manufacturing partners rely on experienced machinists to support precision repair, overhaul and production work where accuracy, setup knowledge and craftsmanship matter.

Apply Today

If you have hands-on manual lathe experience and can independently set up, machine and inspect precision components, apply today to join FlexTrades as a Manual Lathe Machinist.

Equal Opportunity Employer

FlexTrades is an equal opportunity employer and considers all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information or any other protected characteristic under applicable law.

FlexTrades is hiring experienced CNC Programmers for nationwide project-based manufacturing assignments supporting precision horizontal milling operations.

This role is designed for programmers with hands-on Siemens NX experience who can develop tool paths, create and edit G&M code, support machine prove-outs and produce accurate setup documentation for CNC horizontal mills.

Position Overview

The CNC Programmer is responsible for programming horizontal mills using Siemens NX while supporting production readiness from initial programming through machine dry runs and prove-outs.

This position requires strong experience with 3D models, 2D prints, GD&T, Fanuc-style programming and the ability to develop machining strategies that meet dimensional and surface finish requirements.

Responsibilities

Program CNC horizontal mills using Siemens NX
Create and edit G&M code for J-TEKT/Toyoda horizontal mills
Develop tool paths using customer models, prints, tooling data and fixture information
Determine appropriate fixture clamping and workholding requirements during programming
Create setup sheets as part of the programming process
Support machine dry runs and prove-outs
Validate CNC programs before production
Optimize existing programs to improve machining performance
Read and interpret complex 3D models
Read and interpret 2D prints and GD&T requirements
Ensure programs meet dimensional tolerance requirements
Ensure programs meet specified surface finish requirements
Collaborate with manufacturing teams to support production readiness

Qualifications

Experience programming CNC horizontal mills
Siemens NX experience required
Experience creating and editing G&M code
Fanuc-style programming experience
Ability to read and interpret 3D models
Ability to read and interpret 2D prints
Experience working with GD&T specifications
Knowledge of machining steel components
Knowledge of machining aluminum components
Ability to support machine prove-outs and dry runs
Experience creating setup sheets
Vericut simulation software experience preferred

About FlexTrades

Our manufacturing partners rely on experienced CNC Programmers to create accurate machining programs, support machine prove-outs and help keep precision manufacturing operations ready for production.

Apply Today

If you have Siemens NX experience and a strong background programming CNC horizontal mills, apply today to join FlexTrades as a CNC Programmer.

Equal Opportunity Employer

FlexTrades is hiring experienced Tool & Die Makers for nationwide project-based manufacturing assignments supporting progressive stamping and precision tooling operations.

This role is built for skilled tooling professionals who can troubleshoot progressive dies, respond to press downtime and support production stamping operations from setup through startup.

Position Overview

The Tool & Die Maker is responsible for maintaining, repairing and troubleshooting progressive stamping dies and related tooling.

This position requires hands-on experience with production stamping presses, in-press troubleshooting, progressive strips and GD&T requirements. Tool & Die Makers will also support changeovers, die installations and production teams throughout daily stamping operations.

Responsibilities

Troubleshoot, maintain and repair progressive stamping dies and tooling
Respond to press downtime issues
Perform in-press troubleshooting and repairs
Set up and support production stamping presses ranging from 60 tons to 330 tons
Read and evaluate progressive strips to diagnose tooling and production issues
Inspect parts during setup and production runs
Verify parts meet established quality requirements
Read and interpret blueprints, prints and work instructions
Review and apply GD&T requirements
Document tooling history and setup information
Support tool changeovers and die installations
Support production startup activities
Operate forklifts, pallet jacks and overhead cranes
Work with production personnel to resolve tooling and process issues

Qualifications

At least five years of Tool & Die, tooling repair or progressive stamping experience
Progressive stamping experience required
Experience troubleshooting, repairing and maintaining progressive dies
Experience setting up production stamping presses ranging from 60 tons to 330 tons
Experience performing in-press troubleshooting and responding to press calls
Knowledge of Wintriss controls
Ability to read and interpret blueprints
Knowledge of GD&T requirements
Ability to safely operate forklifts, pallet jacks and overhead cranes
Familiarity with ISO quality standards and production quality requirements
Experience in medical, aerospace or other precision manufacturing environments preferred

About FlexTrades

Our manufacturing partners rely on experienced Tool & Die Makers to maintain tooling, reduce press downtime and support consistent production quality.

Apply Today

If you have progressive stamping experience and can troubleshoot, repair and maintain tooling in a production environment, apply today to join FlexTrades as a Tool & Die Maker.

Equal Opportunity Employer

FlexTrades is hiring experienced Hone Lap Machinists for nationwide project-based assignments supporting high-precision machining and hydraulic component manufacturing.

This opportunity is designed for machinists with hands-on experience setting up and operating manual honing and bench lapping equipment. The role requires the ability to hold extremely tight tolerances, verify surface finishes and inspect small-diameter components throughout production.

Position Overview

The Hone Lap Machinist sets up and operates manual bore honing and manual bench lapping machines to finish precision hydraulic components.

This position works with hardened stainless steel and chrome-plated parts ranging from .150 inch to 1/2 inch in diameter. Machinists will perform honing, lapping, polishing, dimensional inspection and hydraulic flow bench verification while maintaining strict quality standards.

Responsibilities

Set up and operate manual bore honing machines
Set up and operate manual bench lapping machines
Hone and lap precision hydraulic components to extremely tight tolerances
Work with small-diameter parts ranging from .150 inch to 1/2 inch
Perform polishing operations on hardened stainless steel components
Perform polishing operations on chrome-plated components
Read and interpret blueprints and engineering drawings
Follow routers and written work instructions
Measure and inspect parts using air gauges
Use micrometers, profilometers and hand gauges
Verify dimensional accuracy throughout production
Inspect parts for surface finish and overall quality
Perform hydraulic flow bench verification on completed components
Document inspection results
Record discrepancy information as required
Maintain quality standards in a high-precision job shop environment
Follow established safety, quality and manufacturing procedures

Qualifications

Experience setting up manual honing machines
Experience operating manual lapping machines
Bore honing experience
Bench lapping experience
Precision manufacturing background
Experience holding tight machining tolerances
Ability to read and interpret blueprints
Knowledge of GD&T
Experience using precision measuring instruments
Hydraulic component manufacturing experience

About FlexTrades

Our manufacturing partners rely on experienced precision machinists to finish critical components, maintain demanding tolerances and verify quality throughout production.

Apply Today

If you have manual bore honing and bench lapping experience and are comfortable working with small precision components, apply today to join FlexTrades as a Hone Lap Machinist.

Equal Opportunity Employer

FlexTrades is hiring experienced Run Up Technicians for nationwide project-based assignments supporting HVAC, refrigeration and chiller manufacturing operations.

This role is designed for technicians who can perform final equipment testing, diagnose electrical and mechanical failures and verify completed units meet performance and quality requirements before release.

Position Overview

The Run Up Technician performs final testing, troubleshooting and repair on completed HVAC and chiller units.

This position requires experience with energized equipment, refrigeration systems, electrical diagnostics and performance testing. Technicians will also document test results, complete corrective actions and follow established Lockout/Tagout procedures throughout the process.

Responsibilities

Perform final testing, troubleshooting and repair of completed HVAC and chiller units
Complete Hi-Pot testing
Perform Megger testing
Complete dry testing
Perform energized run testing
Conduct wet and performance testing
Diagnose electrical, mechanical and programming-related failures
Test fans, sensors, compressors, valves and transformers
Test PLCs, power supplies, HMIs, relays, pumps and receptacles
Energize and de-energize equipment according to Lockout/Tagout procedures
Add or remove refrigerant using recovery tanks, pumps, scales and gauges
Replace defective components based on test results
Make approved wiring and control adjustments
Connect water lines during testing
Fill and drain systems as required
Verify units are leak-free during testing
Complete testing records and defect reports
Maintain required paper and electronic quality documentation
Maintain a safe, clean and organized work area

Qualifications

EPA 608 Type II certification required at minimum
Experience working with HVAC, refrigeration or chiller systems
Ability to troubleshoot electrical and mechanical equipment
Experience using multimeters
Experience using amp clamps
Ability to read and understand electrical wiring principles
Experience performing equipment testing and diagnostics
Comfortable working with energized electrical systems
Ability to document testing results and corrective actions
Experience using refrigeration gauges preferred
Experience using temperature probes or humidity probes preferred
Previous Hi-Pot testing experience preferred

About FlexTrades

Our manufacturing partners rely on experienced technicians to test completed equipment, identify defects and support reliable production operations.

Apply Today

If you have HVAC, refrigeration or chiller experience and can troubleshoot electrical and mechanical systems during final equipment testing, apply today to join FlexTrades as a Run Up Technician.

Equal Opportunity Employer

FlexTrades is hiring experienced HBM Machinists for nationwide project-based assignments supporting large-part machining and heavy industrial manufacturing operations.

This opportunity is built for machinists with experience setting up and operating large Vertical Turret Lathes, Vertical Boring Mills or comparable CNC lathe equipment. The role involves machining large steel components, making offsets, changing tooling and performing in-process inspections in a job shop environment.

Position Overview

The HBM Machinist sets up and operates large CNC machining equipment with a focus on Vertical Turret Lathes and Vertical Boring Mills.

Machinists will complete turning, drilling, tapping, boring and slotting operations on large carbon steel and stainless steel parts. This position requires blueprint reading, basic GD&T knowledge and the ability to make independent machine adjustments that maintain dimensional accuracy and production quality.

Responsibilities

Set up and operate large Vertical Turret Lathes with Fanuc controls
Operate Vertical Boring Mills and comparable large CNC lathe equipment
Machine large carbon steel and stainless steel components
Perform turning, drilling, tapping, boring and slotting operations
Make machine offsets and adjustments to maintain part quality
Change tooling during setups and production runs
Assist with machine setup verification
Read and follow blueprints, setup sheets and work instructions
Perform deburring using grinders, files, Scotch-Brite and buffing tools
Conduct in-process inspections using calipers, micrometers and other measuring instruments
Verify completed work meets established quality requirements
Document inspection results accurately
Move large parts and fixtures using overhead cranes and forklifts
Maintain a clean, safe and organized work area
Follow all established safety, quality and manufacturing procedures

Required Qualifications

Experience setting up and operating VTLs, VBMs or large CNC lathe equipment
Ability to make machine offsets and operating adjustments
Experience machining large and heavy components
Experience machining stainless steel and carbon steel
Ability to read and interpret blueprints
Understanding of basic GD&T
Experience using calipers, micrometers and other precision measuring tools
Experience performing deburring with hand and power tools
Ability to work with large parts in a job shop environment
Ability to work in a loud and dirty manufacturing environment
Ability to work in shop temperatures that may be hot or cold depending on the season

Preferred Qualifications

Experience operating Fanuc-controlled machines
Experience machining large forgings
Overhead crane experience
Forklift experience
Experience working in nuclear manufacturing
Experience working in heavy industrial or similar manufacturing environments

Training may be provided for overhead crane and forklift operation.

About FlexTrades

Our manufacturing partners rely on experienced machinists to complete complex setups, handle large components and maintain precision throughout demanding machining operations.

Apply Today

If you have experience setting up and operating large VTL, VBM or CNC lathe equipment, apply today to join FlexTrades as an HBM Machinist.

Equal Opportunity Employer

FlexTrades is hiring CMM Programmers for project-based manufacturing assignments across the United States. This role is built for quality and metrology professionals who can program CMMs, interpret complex blueprints and apply GD&T standards to inspect precision parts and assemblies.

If you have experience with PC-DMIS, Calypso or both, and you can work independently in a fast-paced production environment, this is a strong opportunity to put your inspection and programming skills to work.

Position Overview

The CMM Programmer will support dimensional inspection and quality verification for complex components and assemblies. This role requires strong CMM programming ability, blueprint reading, GD&T knowledge and the ability to produce accurate inspection results in a manufacturing environment where precision matters.

Responsibilities

Program CMMs using PC-DMIS, Calypso or both
Perform dimensional inspections on complex parts and assemblies
Read and interpret blueprints, engineering drawings and technical documentation
Apply GD&T standards during inspection and measurement activities
Support first article, in-process and final inspection requirements as needed
Verify part conformance to customer and engineering specifications
Document inspection results clearly and accurately
Use Faro Arm or PowerInspect equipment when required
Support inspection work involving composite materials when required
Work independently while maintaining quality, accuracy and production expectations

Qualifications

Experience programming CMMs with PC-DMIS, Calypso or both
Strong blueprint reading skills
Strong GD&T knowledge
Experience with complex parts and assemblies
Faro Arm and PowerInspect experience is a plus
Composite materials experience is a plus
Ability to work independently in a fast-paced environment

Authorization

Candidates must be legally authorized to work in the United States.

About FlexTrades

FlexTrades is a manufacturing workforce solutions company that deploys skilled tradespeople and technical specialists to worksites across the United States. We support manufacturers by placing experienced professionals who can step in, solve problems and keep production moving.

Our teams support precision machining, quality inspection, metrology, fabrication, assembly and production operations where skill, accountability and execution matter.

FlexTrades is an Equal Opportunity Employer.

FlexTrades is hiring Brazers for project-based assignments supporting commercial and industrial production work. This role is built for skilled tradespeople who can cut, bend and braze copper tubing, install refrigeration components and work from technical drawings, BOMs and production schedules.

If you have experience brazing large-diameter piping in a commercial or industrial setting, this is your lane.

Position Overview

Brazers will make and install refrigeration and water subassemblies for production units. This role requires hands-on experience with copper-to-copper, copper-to-stainless and copper-to-brass joints using oxy-acetylene torches, along with the ability to inspect work, resolve defects and support system preparation.

Responsibilities

Make and install refrigeration and water subassemblies for production units
Cut, bend and braze copper tubing
Install refrigeration components
Perform brazing on copper-to-copper, copper-to-stainless and copper-to-brass joints using oxy-acetylene torches
Work with piping ranging from 2 1/8 inches to 4 inches or more in diameter
Clean and prep materials prior to brazing
Follow production schedules, BOMs, drawings, diagrams, ECNs and work instructions
Inspect materials and completed work for quality
Resolve defects as needed
Assist with pressure testing, evacuation and system preparation
Use hand tools, gauges and torque equipment
Install labels
Perform basic checks on units
Maintain a clean work area
Report material or process issues to leadership

Qualifications

Experience brazing in a commercial or industrial setting
Ability to braze large-diameter piping beyond residential applications
Experience with oxy-acetylene torches and silver-based filler materials
Ability to read blueprints and technical drawings, including metric and standard measurements
Familiarity with refrigeration or HVAC systems
Understanding of heat control, joint preparation and working with copper and mixed metals
Knowledge of high-pressure systems and safe work practices
Mechanical aptitude with hand and power tools
Experience with pressure testing, evacuation or refrigerant handling is a plus
EPA 608 certification, Universal or Type II, is a plus

About FlexTrades

Our teams support fabrication, assembly, machining, maintenance, welding, production and other critical manufacturing operations where skill, accountability and execution matter.

Apply Today

If you are ready to put your brazing experience to work on projects that demand precision, consistency and strong production support, apply today.

FlexTrades is an Equal Opportunity Employer.

FlexTrades is hiring experienced Blow Mold Process Technicians for nationwide project-based assignments supporting extrusion blow molding operations.

This role is designed for technicians who understand blow molding processes, can validate machine setups, troubleshoot production issues and make controlled process adjustments to maintain quality, efficiency and output.

Position Overview

The Blow Mold Process Technician monitors and supports extrusion blow molding operations across multiple production lines.

This position requires hands-on experience with accumulator head continuous extrusion blow molding equipment, hydraulic and pneumatic systems, machine HMI controls and HDPE materials.

Responsibilities

Monitor and validate extrusion blow molding operations across multiple production lines
Verify machine setups completed by Setup Technicians before releasing equipment to production
Troubleshoot process, quality and production issues using root cause analysis
Adjust machine parameters within approved ranges
Maintain product quality and production efficiency
Work with Graham, Sterling and Cincinnati Milacron blow molding machines
Review and follow process sheets, machine parameters and production requirements
Pull production samples for evaluation
Work with Quality and Materials teams to resolve production issues
Communicate production performance and process concerns
Document and communicate reasons for missed production metrics
Follow all established safety procedures
Follow Lockout/Tagout requirements
Operate forklifts and other approved equipment as needed

Qualifications

Experience as a Blow Mold Process Technician in a manufacturing environment
Experience with accumulator head continuous extrusion blow molding machines
Strong understanding of hydraulic systems
Strong understanding of pneumatic systems
Strong mechanical knowledge
Experience troubleshooting blow molding process and quality issues
Experience adjusting machine parameters through HMI controls
Knowledge of single-head and multi-head extrusion blow molding equipment
Experience working with HDPE materials
Ability to read and follow process sheets
Ability to follow production instructions
Strong commitment to workplace safety
Knowledge of Lockout/Tagout procedures
Forklift and crane experience preferred
Training provided for forklift and crane operation if needed

About FlexTrades

Our manufacturing partners rely on experienced Blow Mold Process Technicians to stabilize processes, troubleshoot production issues and support consistent product quality.

Apply Today

If you have hands-on extrusion blow molding experience and can troubleshoot processes, validate setups and adjust machine parameters, apply today to join FlexTrades as a Blow Mold Process Technician.

Equal Opportunity Employer

FlexTrades is hiring experienced Injection Mold Technicians for nationwide project-based assignments supporting plastic injection molding and manufacturing operations.

This role is built for technicians who understand injection molding processes, can troubleshoot quality and production issues, and know how to make precise process adjustments that reduce scrap, maintain cycle times and keep production moving.

Position Overview

The Injection Mold Technician monitors and adjusts injection molding processes to ensure production and quality requirements are met.

This position requires hands-on experience troubleshooting molding issues, verifying machine parameters, completing First Article Inspections and working with hot runner molds, multi-cavity tooling and automated production equipment.

Responsibilities

Monitor injection molding processes to ensure quality and production requirements are met
Troubleshoot molding and quality issues
Make process adjustments as required
Verify machine parameters against approved process sheets and production standards
Monitor cycle times and machine performance
Monitor part quality to help reduce scrap and downtime
Complete First Article Inspections
Maintain required process documentation
Verify materials and colorants meet specifications
Verify finished parts meet quality requirements
Support production teams in resolving process and equipment issues
Monitor robotic systems and identify when corrective action is required

Qualifications

Experience as an Injection Mold Process Technician in a manufacturing environment
Experience troubleshooting and adjusting injection molding processes
Experience working with hot runner molds
Experience with valve gate systems
Understanding of valve gate hot runner operation and mechanics
Experience working with multi-cavity injection molds
Knowledge of velocity settings
Knowledge of transfer position settings
Knowledge of pack and hold settings
Ability to follow process sheets and production recipes
Ability to follow quality documentation
Experience working with multiple injection molding machine sizes and controls
Strong troubleshooting and problem-solving skills
Experience with automated equipment or robotics preferred

About FlexTrades

Our manufacturing partners rely on experienced Injection Mold Technicians to maintain stable processes, troubleshoot production issues and support consistent part quality.

Apply Today

If you have hands-on injection molding experience and know how to troubleshoot processes, adjust machine parameters and maintain production quality, apply today to join FlexTrades as an Injection Mold Technician.

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Required Qualifications

Preferred Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Qualifications

Authorization

About FlexTrades

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Position Overview

Responsibilities

Qualifications

About FlexTrades

Apply Today

Equal Opportunity Employer

Follow us